Home Products Parts & Service Case & Event Contact About SENX  

Case & Event

G9180 is SDLG in absorbing VOLVO advanced technology research and development on the basis of a high speed, high efficiency, high precision and multi-purpose products, can realize the ground level and trenching, slope scraping, bulldozing, snow, osteoporosis, compaction, cloth, mixing, etc, are widely used in highway, airport, national defense engineering, mine construction, road construction, water conservancy construction and farmland improving construction conditions.
1, configuration, wei chai WP6G190E22 engine, and hang chi tooth 6 wg180 gearbox perfect match, achieve the best performance and fuel efficiency, energy conservation and high efficiency.
2, using imported high pressure pump and multiplex, quantitative hydraulic system pump double circuit, working system pressure of 21 m pa, high work efficiency.
3, the front wheel can tilt plus or minus 18 °, greatly reduce the turning radius, flexible machine. When slope, the front wheel tilt, increase the adhesion, improve the stability of the whole machine. Tilt of the wheel, the lateral force to offset the material on the shovel, prevent the front wheel side slip.
4, by adopting the technology of Volvo, double oil cylinders drive tray type work device, driving force is big, high reliability; The shovel can load, work precision is high, the first domestic industry.
5, pendulum using free of lubrication, maintenance free composite bearing, low friction coefficient, impact resistance, wear resistance, high reliability; Using hydraulic lock cylinder positioning, convenient operation.
6, standard cab, good sealing, safe and reliable; Before seeing clearly, can clearly see that the front wheel, the shovel, convenient operation, high precision operation.
7, the whole machine electric centralized control, three-stage alarm monitoring system, digital step instrument display, human-computer interaction, inspection and maintenance is convenient.

 

Item

Specifications

Length*width*height

8975×2710×3240mm

Front axle minimum clearance from the ground

610mm

The rear axle clearance from the ground

430mm

Wheel base

2260mm

The wheelbase

6480mm

Rear axle wheel track

1538mm

The operation weight

15300kg

The front wheel tilt Angle

±18°

Front axle swinging Angle

±16°

The front wheel steering Angle

±50°

Frame articulated steering Angle

±23°

Cutter diameter

1626mm

The knife dish specifications

3962×635×25mm

The shovel turning Angle

360°

The minimum bending radius

7.6m

The shovel off the ground clearance

445mm

Shovel knife cutting depth

787mm

Shovel blade Angle

向前47°/向后5°

The shovel sliding range

左673mm/右673mm

Maximum traction(f=0.75)

78kN

The maximum speed of forward/backward

38/23.6km/h