Products Parts & Service Case Contact About SENX  


        LG6235E is an updated product developed by SDLG on the basis of advanced technology of VOLVO.
        This product has high-strength chassis, reinforced working device, perfectly-matched power and hydraulic system, suitable for use in many bad operating conditions.
        1. The charger inter-cooling engine for DEUTZ 2nd generation of electrically-controlled governor system EMR2 is equipped, with strong power, economic and environment protective property and high reliability; The filtration system is designed with three stage of filtrations such and pre-filtration and air filtration, which effectively improves and prolongs the performance and service life of engine.
        2. Rexroth full-power and positive-flow control hydraulic system is used, with little flow loss and low hydraulic noise; Advanced power control mode is used, with energy-saving and high-efficient properties.
        3. EECU, VECU and IECU electric control systems with special technology of SDLG are used and is energy-saving and high-efficient, which provides the entire machine with multiple working modes to adapt to different working condition; Colored LCD is provided, with functions such as self inspection, monitoring, emergency fault alarm, GPS location and remote monitoring, and also has high human-machine interaction and is convenient for operation and maintenance.
        4. X-shape lower frame and reinforced upper frame for broadening chassis are used, which ensures the entire machine with higher stability and easy to adapt to various working conditions.
        5. Reinforced movable arm, bucket rod and bucket provide the entire machine with stronger ability to adapt to bad operating condition; Multiple working devices such as breaking hammer and rotator grab are optional.
        6. The cab is spacious and bright and of wide visual field, good sealing effect, linkage suspended seat, dual-stage filtration and cold and warm air conditioner. Silicone oil rubber three-stage damper is also provided, with good damping effect, which ensures a comfortable driving environment.




        Overall operating weight

        22300 kg

        Bucket capacity

        1.1 m³

        Max. excavation force

        147.1 k N

        Swing speed

        0-11.7 r/min

        Traveling speed (low/high)

        3.6/5.5 km/h


        9700×2990×2940 mm

        Max digging radius

        9940 mm

        Max. digging depth

        6730 mm

        Max digging height

        6650 mm

        Engine rated power

        127 kW

        Operating pressure

        32/35 M Pa

        Max climbing angle (H)